|Home||Boating Courses||Boating Tips||Safety Links||Ship’s Store||Search|
Rules of Thumb
Operating in Fog
Objects may seem larger than they appear…
When operating in fog be aware that visibility can drop drastically. When visibility is between 30 and 150 yards objects, including other boats, may appear twice as large as normal. The illusion also tends to make you think that they are approaching at a much faster rate than they actually are.
Steering a straight line without a compass…
Many a small recreational boat owner will find themselves steering in fog without a compass. With no compass and with no reference points because of limited visibility, even the best helmsman will tend to steer in circles.
To steer a straight course, attach a light line high on the bow or from the mast and drag a drogue, cushion, or anything that can create resistance over the stern. Keep the line centered where it passes over the stern and you will steer a straight line.
Actions to take in fog…
If you see a fog bank approaching or fog starting to form be sure to fix your position by any and all means necessary, including electronically or by bearings. If possible, anchor and wait out the fog in an area which is too shallow for large ships to operate. Don’t forget to ring your bell for 5 seconds every minute while at anchor. Post as many lookouts as you have onboard and listen intently for the sounds of other vessels. If you hear a vessel approaching, sound the optional one short – one prolonged – one short blast to notify them of your presence.
Don’t throw away that old hose. Cut a piece about a foot long, split is and put it around your dock lines and anchor lines where they pass through the chocks to prevent chaffing.
When you put your boat up for a period of time put a few boxes of kitty litter below. It will absorb moisture, reduce mildew, and eliminate odors.
Always have a metal coat hanger in your tool kit. It can be used to:
Tonnage in boats and large vessels or ships has several meanings depending on what the term is referring to. It can at times be weight and at times be volume. The origin of the word in its maritime sense was the tun, a large cask in which wine was transported. The measurement of an old sailing ship was in tunnage, or the number of tuns of wine that could be carried. Following are the most commonly used definitions:
Gross tonnage is based on a vessels volume and represents the total enclosed space or internal capacity for transporting cargo. A gross ton represents 100 cubic feet.
Net tonnage is gross tonnage less the volume of spaces that will not hold cargo. In pleasure boats these spaces would be the engine compartment, helm station, etc. Net tonnage is also called registered tonnage. In order to document a vessel with the USCG it has to be a minimum of 5 net tons.
Displacement tonnage deals with weight in long tons which equal 2,240 pounds each. This is the actual weight of the boat. This can be calculated by finding the total volume of the boat below the waterline expressed in cubic feet. Divide this number by 35. (35 cubic feet of seawater weigh one long ton)
Deadweight tonnage is to displacement tonnage what net tonnage is to gross tonnage. Deadweight tonnage represents a boats cargo capacity in weight or long tons.
The off-season in many parts of the country can be used to maintain, upgrade or plan for the fun of the upcoming spring and summer boating season. A few "Rules of Thumb" that come to mind may help you with your winter activities.
Need a new coat of paint? In order to estimate how much paint to purchase use the following formulas. (Measurements should be in feet and your answers will be in square feet to cover). You then need to refer to the manufacturer’s brochures or the paint can itself to see how much paint is required to cover the square footage area.
When to Touch Up Varnish
The look of your brightwork says a lot about the pride of ownership that a boater has for his/her boat. A rule of thumb that you can use to tell if you need a touch up or a major overhaul of your brightwork is as follows:
When A Varnish Touch Up Is Too Little Too Late
The only thing worse than going to the dentist is scraping varnish down to bare wood, sanding smooth and starting the arduous task of rebuilding 8 to 10 coats that will give you that "mirror" finish.
You can only patch the small abrasions and scratches so long until, ultimately, moisture has crept under the varnish and into the wood. This saturation of fresh and salt water will show up as dark patches under the still shiny finish. You will also notice lighter patches as the hot sun has glared down and has started to separate the varnish from the wood because of the moisture or perhaps the impact of dropping something on the varnish. It is at this point that you have no choice but to restore the integrity of the surface of your brightwork by scraping it down and starting anew.
Use the following as a step-by-step process to get brilliant brightwork consistently.
Successful winterization focuses on preventing damage and corrosion by water and freezing weather. The most important rule to remember is to find everywhere water may be hiding. Wherever it hides, when it freezes and thaws it can severely damage that structure, pipe, tube or other object that contained it.
For more detailed information on winterization see BRRR – It’s Almost That Time Again – Winterizing Your Boat in the boatsafe.com tips archive.
Another important rule is to protect your vessel from rain, snow, and frost while allowing a continuous stream of fresh air to flow through every nook and cranny. Good ventilation is just as important as roof or cover over the boat.
In order to track down the potential damaging water, look for it in "p" traps under the sinks, sea cocks, holding tanks, strainers and any other place you can think of. You should physically remove as much water as you can and what can’t be removed should be treated with a good dose of antifreeze. Since antifreeze is not recommended for ingestion you may want to use a 50/50 solution of water and vodka for the drinking water lines. Be sure to remember to flush out the system prior to taking the first sip next spring.
As soon as you pull the boat out of the water for the winter, be sure to clean the hull immediately. If you wait until it dries you will have to struggle with the marine growth that would have otherwise rinsed right off.
What about the engine? Engine manufacturers all have their own specific instructions about winterizing and you should consult your owner’s manual. Some of the basics are:
Take the batteries home with you and place on a non-conductive stand (two concrete blocks with a 2 X 6 bridge make a good stand) and provide a trickle charge to keep them "alive" over the winter. Don’t forget to check the battery water every couple of weeks during the winter.
Make a list of maintenance items which you can do over the winter. You know, those things that you should have done during the season but were too busy boating to take the time for.
Knots must earn their worth aboard your boat. In order to be worth their salt they must:
You must do your part with respect to knots. You should be able to tie them as automatically as you do your shoe laces. The reason that you don’t have to think about tying your shoes is something called "muscle memory". The muscles in your fingers have been flexed in the same manner so often that your brain doesn’t have to send individual signals to all the muscles involved. The memory appears to actually lie in the muscles themselves.
Knots obviously introduce kinks into a line that can diminish its strength. Some knots introduce tighter kinks than others. A three-strand line that has been tied with a knot that causes a tight kink can lose up to 30 percent of its strength. This loss of strength can cause a line to part more quickly under strain.
The reduction of line strength varies with the knot. Some examples follow:
See also: Marlinespike for Recreational Boaters
In clear weather, one can distinguish the shapes of tall houses, trees, lighthouses, etc. from about 8 miles offshore. The distance to the horizon however can be quite small. if, in a small boat, your eye is 5 feet above the water level, the distance to the horizon is only 2.5 miles away. Although the distance can be more accurately estimated using the formula
Some rules of thumb you can use are as follows:
It is possible to use something as simple as a pencil to determine approximate distance off. In order to use pencil radar:
When navigating in areas with uncharted coral reefs it is a good idea to wait until the sun is high and behind you – from 10AM to 4PM. (This is why charter companies encourage you to anchor no later than 4PM.) Height above deck is an advantage to the spotter and vision can be improved with polarized sunglasses. Calm, grey days are the most difficult when trying to look deep into the water. As a rule of thumb in reading the water:
Even if your pyrotechnic devices (flares) are within the expiration date printed on each flare, you can only presume that 50% of them will actually work properly.
This is a sensible rule of thumb for any small vessel venturing out of protected waters. The U.S. Coast Guard minimum requirements do not take into account the often damp and exposed stowage conditions of pyrotechnics on small vessels.
Although you can never know for sure whether the device will work properly until you try it, you can make some precautions to increase your odds. Start by checking your existing flares by pulling off the striker top. If you find beads of moisture inside, you can probably rest assured that they will not work. Next, place your NEW flares in a waterproof, zip lock container. If available put a packet of silica (the kind you find in electronic equipment boxes to absorb moisture) in the bag with the flares. More on Distress Signals
As kids we all thought that echoes were fun and interesting but did you know you could use them in piloting? Note the time in seconds from a signal to the return echo from a cliff, iceberg, wharf, or moored freighter. Every second’s delay indicates a distance off of 1 cable, or 200 yards. Every 10 second’s delay indicates a distance off of 1 mile.
This rule could be useful in fog some day. A blank pistol shot produces a sharp echo, but the ship’s bell or horn will work as well. Even a loud hailer works in close quarters. The Rule of Thumb at work here is that sound travels about 1 mile in 5 seconds.
Many things depend on how you are going to get to your boat on the mooring. If there is a launch that simply drops you off, that eliminates one variable. If, however, you have a dinghy to reach the mooring, is the dinghy left there while you boat, or do you pull it behind you? The most important thing to remember when using a dinghy is not to get the dinghy painter (line) fowled in the prop of the boat.
Departing from and retrieving a mooring is much like anchoring. When departing, make sure your engine is warmed thoroughly and check other boats around you. All the boats should be pointing into the wind and/or current, whichever is greater. Make sure when you drop the mooring that you have sufficient room to get under way and establish steering control before you are blown or pushed into other boats. Plan your departure path prior to dropping the mooring. Pull forward, into the wind or current, slowly until the mooring line is slack. I am assuming that the mooring line has a float on it so when dropped it is easy to pick up. If not, you should rig one. Once you are in a position to drop the mooring line, do so and back slowly, make your turn to a path that will lead out of the mooring area and slowly motor away.
When picking up a mooring, look at the other boats first. This will tell you the direction of wind or current, whichever is stronger. Approach slowly into the wind or current and shift to neutral when close enough to pick up the mooring line. (Don’t overshoot the mark and get the mooring line fouled in the prop.) Once the mooring line is retrieved, simply attach it securely to the bow and let the wind or current set the boat back on the mooring line.
You can find additional information on moorings and mooring procedures in Chapman Piloting and Small Boat Handling, the boater’s bible.
Tilt/Trim: I understand the basic principle of these functions, but I am not familiar with when/how to use them. For example, I usually start off with tilt fully lowered. Then, after I gain speed to my desired cruising velocity, I’m not sure what will happen if I pull the tilt up. I notice my bow pull up sometimes. And, I cannot tell what trim is doing whatsoever. Please explain basic operating functions of these features.
The trim on outboards and inboard/outboards is used to balance the boat in various conditions. As you mention, you should start with the motor in the vertical, 90 degree angle, to the water’s surface. Once you are "on plane" you can adjust the trim down or up to balance or flatten the boat. Trimming will help compensate for different conditions, weight distribution, etc.
By trimming "down", which puts the lower unit closer to the transom, the stern will be pushed up and the bow will plow. On the other hand, if you trim "up", meaning that the lower unit is further from the transom, the stern is pushed down and the bow is pushed up.
In smooth water with the bow trimmed "up" slightly, you may get a little more speed. In rough water you may get a slightly smoother ride with the bow trimmed down slightly. Simply put, tilt is what the outboard/outboard-inboard does. Trim is the effect that it has on the boat. Trim is the horizontal adjustment of the boat which makes the bow and stern move up and down.
Wake crossing: When the lake begins to get more and more crowded over the course of the day, the water gets choppier and choppier. Is there a good method of crossing wakes without having to greatly drop speed? The only thing I’ve seen is to turn my direction to be almost parallel to the wake. This seems to be fine, but in tighter situations, this isn’t always an option. Slowing down works, but this doesn’t seem very feasible or enjoyable to the skier, if we are pulling a water skier. Will the jumping across wakes harm the boat hull, or will it be only uncomfortable to the occupants of the boat?
Depending on the size of the wake you are crossing, you may be forced to slow your speed to keep from pounding the bow of the boat or even leaving the water entirely. Both can do damage to the boat and/or your engine. The best way to handle wakes, if traffic allows, is as follows:
To prevent spills into the bilge when you’re replacing your oil and fuel filters, line the area with newspapers, paper towels, or oilsorb pads. When changing the filter, wrap a plastic bag around it before breaking it free. Any spills will drain into the bag instead of the bilge. Be sure to dispose of oils and fuels at a proper disposal/recycling facility and remember that Federal Law prohibits discharge of these materials into the water- you could be fined.
Did you ever find yourself aground and wonder how to get off? One method is kedging. Kedging is accomplished by setting an anchor back in the direction "where you were floating" and pulling yourself off with the anchor line. Of course this works best if you wrap the line around a winch and winch yourself off. Setting the anchor is easy if you have a dingy, however, if none is available and conditions permit (and only as a last resort) a good swimmer wearing a PFD can take the anchor out resting on another PFD or anything that floats. When he/she is out as far as the anchor rode will allow, let go the anchor and bring the float back. Always have the swimmer do this wearing a PFD so they do not get fatigued. Related info
Accident Reporting – Federal and state laws require the reporting of any boating accident that involves a fatality, injuries requiring medical treatment beyond first aid or property damage over $2,000. Some states have lower property damage limits. "Accidents" include capsizing, falls overboard, collisions, fire, sinking/flooding, explosions, or disappearance and should be reported to your local boating authority. Related Info
The original "Rule of Thumb" is thought to be the principle adopted by shipmasters to avoid dangers. They would never allow their vessel to approach a danger nearer than the distance that corresponded to a thumb’s width on the chart. On a large-scale chart with plenty of detail they could navigate closer to potential dangers than on a small-scale chart with less detail.
|Home||Boating Courses||Boating Tips||Safety Links||Ship’s Store||Search|